Deep sump spacer made from alloy. This increases the volume of air in the crankcase and helps reduce 'heavy breathing'. The oil is also better cooled when using one of these. Finished externally in silver paint

To fit this sump spacer you will need longer sump bolts (14 x SSA06055 + 4 x SSA06090) and a pair of sump gaskets (ENA14036). You will also need a longer dipstick, see ENA28005

 Availability varies on this part, check availability

 14003240 GU14003240 14 00 32 40
 1400 3240 1400.3240 14.00.32.40

Sump bolt kit containing all replacement stainless steel socket cap bolts for models without a sump extension fitted

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070)

 More than 5 in stock

Sump bolt kit containing all replacement stainless steel socket cap bolts for models with a sump extension fitted. Some models e.g. Cali 1100 and series 1 Cali EV models have a sump extension fitted as standard

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). For Cali EV models check whether you have a sump extension fitted, the later one piece deep sump uses SSA80008

 More than 5 in stock

Sump bolt kit containing all replacement stainless steel socket cap bolts for your sump cover

For Cali EV models check whether you have a sump extension fitted, the earlier models withh sump extension use SSA80007. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070)

 More than 5 in stock

Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. Includes a cut out for the oil filter and dipstick

To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part is also known as a windage plate. Note that deep sump ENA14005 is not compatible with this plate

 1 in stock

Dust cover for steering head bearing

2 required on Cali EV and other models

 1 in stock

 14517000 GU14517000 14 51 70 00
 1451 7000 1451.7000 14.51.70.00

Steering lock flap and rivet. If you are fitting a new steering lock (FRA28550) you will probably require this flap and rivet to keep the steering lock in place

Will also fit other small twin, 850/1000 and California 1100 models but check the shape of your lock cover before ordering. As standard the lock cover on many of these models is round rather than teardrop shaped

 2 in stock

 28782551 GU28782551 28 78 25 51
 2878 2551 2878.2551 28.78.25.51

Replacement steering lock with 2 keys, fits into headstock

See FRA28551 for the steering lock cover flap and rivet. Also known as Guzzi ref. 12782830, 19782520

 2 in stock

 28782550 GU28782550 28 78 25 50
 2878 2550 2878.2550 28.78.25.50

Steering Head Bearing Spacer for base of steering stem

 This part is available by special order, request a quote

 14516700 GU14516700 14 51 67 00
 1451 6700 1451.6700 14.51.67.00

Starter ring gear

See ENA98420 for bolts

 This part is available by special order, request a quote

 17067900 GU17067900 17 06 79 00
 1706 7900 1706.7900 17.06.79.00